Link Brackets

Axle Side

Axle link / coilover mount ANGLED

Axle link / coilover mount
Combine your lower link and coilover/shock mounts and save space with this ultra strong self-jigging design. For shocks with 1.25" mountng width. Link mount provides 3.0" mounting width for use with our Ultra Duty 3.0" Ballistic Joints with 3/4" bolt holes. Angled at 22.5 degree for triangulated suspensions. Cut from .250" plate steel. Shock hole diameter is 1/2". Price includes 2 bracket sets. Available for 2.5", 3.0", 3.25", 3.5" axles. Part # BRK-1059-51. More sizes forthcoming. Combine your lower link and coilover/shock mounts and save space with this ultra strong self-jigging design. For shocks with 1.25" mountng width. Link mount provides 2.63" mounting width for use with our flex joints or 1.25" Rod ends with our High Misalignment spacers. Cut from .250" A50 plate steel. Shock hole diameter is 1/2" and link mount bolt hole diameter is 9/16". Price includes 2 bracket sets. Part # BRK-1059

Frame Side

Dual frame link mount (passenger side)

Heavy Duty Frame Link Mount (driver side)
Mounts to frame for a compact self-jigging design eliminating the need for a cross-member in some cases. Cut from 1/4" steel with an inner mounting width of 2 5/8". Bolt hole diameter is 9/16". Includes ONE bracket. NOW AVAILABLE with 10 degree offset for upper mount. Choose from passenger side (shown above) or driver side (inverted). Part # BRK-1033 Frame bracket designed to be welded to the bottom of the frame rail. Self-jigging design spaced 2.63" inside for use with 2.63" Ballistic joints or 1" rod ends with High misalignment spacers, or choose 3.0" for use with 3.0" bushing or our 3.0" Ballistic Joint. Laser cut and CNC formed from .250" P&O steel. Individual part numbers laser etched into base plate and gusset. Price includes ONE bracket. Part # BRK-1072.

Panhard Mounts

Offset Panhard / Tracbar mount

Frame side Panhard mount

CUSTOM
Axle Panhard / Trac bar mount for axle tube. Offset 7/8" from axle centerline to allow for a bolt that is parallel to the ground. Cut from .250" A50 plate. Bolt hole diameter 3/4", joint mounting width 1.75". For use with XM-12/14 with standard rod end spacers (check in related items below). Features a 6 or 7 inch axle separation. Includes ONE bracket. Part #s 1002 (6in), 1003 (7in). CUSTOM SEPARATIONS and AXLE TUBE SIZES AVAILABLE just enter dimensions into "CUSTOM" field.

Links

Rod Ends

3.0" FORGED Ultra Duty BALLISTIC joint

The Massive 3.0" rebuildable Ultra Duty BALLISTIC joint exclusively from Ballistic Fabrication is built to withstand extreme punishment. It's extra large 3/4" bore (bolt hole) is large enough to handle heavy torque, while the huge 3.0" diameter .485" wall (nearly 1/2" thick!) housing accomodates 34 degrees of total misalignment. The giant 2" ball distubutes the forces over a larger surface area and translates into a better ride and longer life as well as superior strength. Every 3.0" Ballistic joint features solid billet Nylatron GS races that won't deform under load and provides a smooth bearing surface for a noise free ride. Fully greasable and rebuildable. All joints include full zinc plating. Sold individually.

Choose from a 1.0" 14 tpi., 1.25 12 tpi stud, or try an industry first, the massive 1.5" - 12tpi stud available in both right or left hand thread.

100% made in the USA!

End Caps

1.25" -12 tpi Tube Adapter

Size 3: A: 1.5 in, B: 1.25 in 12 tpi, C: 2.25 in, D: 2.0 in, E: 1.0 in

1020 CRS Tube adapter 1.25" -12tpi